|
Listed below are some testimonial letters from our
clients. As you read these you will see that we are committed to
quality work & customer service.
If you have a comment you would like to make to us please contact us
at
feedback@lstechnologies.ca
We would like to extend a special thank-you to all our clients for
your patronage.
We have a dinosaur of a Tanning bed (an older
Style-that is) and the shocks had gone bad very bad they would
no longer hold up the lift up side of the tanning bed. This
tanning bed is extremely heavy and since they are no longer made
of this style, the parts for it were very hard to find.
While surfing the net we came across this web site for Lift
Support Technologies Custom Gas Springs….
http://www.lstechnologies.ca/
Wow, these people are truly Awesome…. They will follow-up with
you until you are completely satisfied. Steve and Nolan know
exactly what it takes to run a successful business and the key
is Customer Service first…. Now that’s hard to find these days
unfortunately! So we want to thank you both from the bottom of
our hearts, just know we appreciate everything you did, and we
will definitely recommend your place of business to everyone we
know.
In Our opinion this Company is rated an A+ the
Best place to find True Compassion and Willingness to Serve and
Satisfy their customers.
If you’re in need of Gas springs, waste no more time searching
--- you have found the right place For Sure...
Thank you kindly
Sincerely,
Ron & Laura Zimmerman
I got my hatchback lift supports
today. I installed them on the car and less than 10 min. They
fit perfectly and performed wonderfully. I am very pleased with
the quality and workmanship of the supports. Finally after a
year and a half a owning the car, the hatch stays up on its own.
Thank you so much. I would recommend you guys to anyone in the
same situation that I was in. No one can bet the quality and
price that LS Technologies provide. Best of all, the one on one
customer support you guys at LS provide and the speedy responses
to the questions I asked. Thank you again.
Tyler
Reinhardt-2002 Toyota Celica GTS
Received my Hood Strut Kit from Steve (LS Technologies) yesterday.
It's a very nice looking & operating Kit. The installation is
fairly straight forward, along with some common sense.
I recommend them to anyone with a 2003 or 2004 SSR.
I give LST five stars ***** & a pat on the back for this Kit !
Thanks, Topcat55
Thank you so much for repairing the original rear glass gas struts
on my 1982 Corvette Collector's Edition Car. You guys really
impressed me with your technical knowledge, abilities and skills.
My rear glass hatch was not opening properly and I thought I had no
chance of finding a solution due to the age of my car. I was
pleasantly surprised with your polite and courteous customer service
when I first called to explain my problem. Your words of
encouragement prompted me to send the gas struts to you for repair.
I was confident you could restore them to their original condition.
I also appreciated it when you received the struts and called me to
explain your strategy to repair them. I can't tell how happy I was
when I received them back in less then a week and reinstalled them.
They work just like they are brand new. When I pull the latch to
release the hatch the response is incredible. The glass hatch
raises effortlessly to its full height. It is a magnificent display
to watch and one that I am quite pleased with. Quite simply they
work like a charm!!! Thank you again and please feel free to use my
testimony to encourage others to utilize your expertise.
Sincerely,
Vincent DeGregorio
USA
To whom it may
concern,
I own a rare 1936
MERCEDES 500K Special Roadster, factory reproduction of which 46 were
made. As one could imagine, it is not easy to find parts for this car.
Well I needed new trunk lifts and after searching everywhere and even
calling the factories that make these lift supports, I found myself to
be completely S.O.L. excuse the expression.
Then I found website for L.S. Technologies. Their site claimed
to be able to repower any gas charged lift support and or build new
ones to your specifications. After looking through their site, I
thought yeah right, but alas I decided to give them a call and see
what they had to say. After some conversation and emails I figured I
had nothing to lose so I sent them one of my old. Well I have to tell
you that not only was I very impressed by the personal attention,
great communication, and very prompt service that I got, but they made
me new trunk lifts with the exact pound force that I required. In this
day of “Oh well it says this or that on the computer” or “We don’t
show your information in our system” or “ Our system is down or any
number of excuses people use when they don’t do their jobs, it is
really nice to know that there are still honest people who will give
you exceptional service with a smile. Steve bent over backwards and
went way above and beyond the call of duty. I would highly recommend
this company to anyone.
VERY
SINCERLY D. BLAESING PASCO FLORIDA U.S.A.
I am an avid car enthusiast who has
been building street rods for over forty years. My most recent
project is a 1931 Ford, Model 'A' Sedan street rod with gull wing
doors. In the past I have experienced many difficulties in
acquiring a hatch prop that would properly and safely hold up our
doors.
After searching the Internet I
discovered LS Technologies and contacted them and explained to
Steven and Nolan my problem with the hatch props. They were
very receptive and eager to help solve my problem. They asked
me to send one of my hatch props for further investigation.
Their professionalism and knowledge allowed me to feel very
confident in sending my props.
They quickly sent out a set of hatch
props to try on my Model 'A'. Their product was superior, easy
installation & aesthetically pleasing!
Thank you for your wonderful customer
service, excellent & affordable product!
Sincerely,
Blake Hunter
Leamington, ON
Dear
future customers,
This is to inform you that not only does LS TECHNOLOGIES help you in
service above all other companies, but they go beyond any imaginable
expectations.
From Florida, I had called LS TECHNOLOGIES to help resolve a problem
that had with the dampers that lift the trunk lid of my '04 Nissan
350z. The dampers were going bad and when I installed a wing on the
deck of the trunk, "voila!" I created my own guillotine.
LS TECHNOLOGIES requested I send them my old ones for testing and with
a trust I had never seen from any other company, they sent me three
sets of dampers with different pressures, for free. They also
remanufactured the setup to make it better than the factory ones I
had. I also received a call from them telling me that when I am
satisfied with a proper pair, that is when they will set up a form of
cost for their master work. I am amazed by their service.
A working trunk and a satisfaction guaranteed, what more can you ask
for LS Technologies is a master in their craft.
Yours truly,
pleased and satisfied.
Lawrence S. Veinotte Enterprises Limited
RR #3
Mahone Bay, Nova Scotia
B0J 2E0
(902) 624-8872
Lift Support Technologies
Saskatoon, Canada
Dear Stephen
Wayne asked me to email you and let you know that the gas springs are
perfect, they work great. Thank you for your quick response! .... FYI
... I did send email to 2 other companies and one replied last Friday
and one yesterday, with a 2 - 3 week delivery date... Your service is
excellent!! Not only did you call us the same day we sent the inquiry,
we have it installed before the other companies replied.
Sincerely,
Katherine Rafuse
Office Manager
Crane Rental, Concrete Septic and
Holding Tanks, Ready Mix Concrete
Your Down To Earth Contractor

I cannot thank you enough for the
superb service you gave us on our
rush order. To sort out what we wanted over the telephone is never
easy.
You got all the facts straight, built the shocks and sent them the
same
day. We received them the morning of the next day.
They were installed immediately and work perfectly.
I am sorry to have pressured you for such Quick delivery but it was a
safety factor for us and therefore urgent.
With this degree of service we have no need to look any further for
our
needs in this area. I am certain you will be hearing from us again.
Thanks
Yours
Larry Dawdy / Rob Benar.
npg envelope
Hamilton, Canada
1/16/2006
http://www.npgenvelope.com/

Max Berscheid writes:
Just
thought I drop a note on how helpful I found your business to be (LS
Technologies). We had customized a 1996 Honda Civic we were installing
a Lambo door kit which included gas springs that were far to stiff, it
took two hands from the outside of the car with the window open to
close (the door). I didn’t know how I was going to fix this. I called
LS Technologies who were recommended by a parts supplier of mine.
Stephen from LS Technologies custom manufactured two replacement gas
lifts with just the right lift (force). Stephen informed me that he
could adjust them (gas lifts) anytime for my customer or me. Thanks
for all your help. I will highly recommend your company.
Max Berscheid
PERFECTION PAINT
& BODY
SASKATOON SASK
CANADA
306-242-1818
http://www.stn-biz.com/perfectionpaint/

September 16,
2004
To Whom It May
Concern:
Re: LS
Technologies
We at Saskatoon
City Hospital have been using the service of Stephen Fenner/LS
Technologies for approximately 2 1/2 years. Previous to having their
services available we were faced with replacement of gas charged
struts by ordering replacements from the original manufacturer.
The new concept,
which was never before available, used by LS Technologies has proven
to be much more cost effective by repairing rather than replacing the
gas struts and invaluable in the case of discontinued parts.
An added bonus is
that the speed and quality of the service supplied is outstanding.
We use LS
Technologies services on many pieces of equipment in the health care
field, to name a few: Office chairs, Therapy tables, Stretchers, etc.
Ken Marshall
Maintenance supervisor
Back To Top

.August 13, 2004
To Whom It May
Concern:
RE: LS TECHNOLOGIES
LS TECHNOLOGIES
did some work for our office in February and March of 2004, repairing
and cleaning chairs and dental stools. We noticed a big difference in
the operation of the stools and the chairs. They were accommodating
with our schedule, even though our office is open 6 days a week.
We would highly recommend this company to any dental office.
Yours truly,
Barry Mang, DDS
Allison Mang, DMD
Back To Top
625D 1st Avenue North
Saskatoon, SK, S7K 1X7
I recently
experienced a problem with the lid of my dry mount vacuum press. It is
a large piece of equipment with a heavy lid requiring gas lift
supports. Over time, the supports that originally came with the press
no longer worked.
The original
manufacturer of the press is no longer in business, which made things
a bit more difficult. I tried many different suppliers, from
automotive to people within our industry, but no one was able to help
me either repair or replace the lift supports. Having spent numerous
hours phoning, driving about and then testing incorrect supports, I
was finally referred to Stephen Fenner of LS Technologies. I contacted
Stephen by phone, he came and examined the press, and within a day my
original cylinders were recharged and I was up and running better than
before.
I was pleased to
find that Stephen’s knowledge was superior, rates were very
reasonable, and service was excellent. I have no hesitation in
recommending LS Technologies to others requiring recharging or
replacement of lift supports and solutions to these problems.
Sincerely,
M.L. Gruza
Owner, Collector’s Choice Art Gallery
Back To Top

RE: LS
TECHNOLOGIES
Please accept
this as a letter of high recommendation for LS Technologies.
After nearly 20 years of use, some of out dentist and assistant stools
would no longer move up and down when we wished to adjust the height
of our chairs. Some of the chairs you could adjust, but would slowly
sink to their lowest height as the day wore on.
All of the dental
service companies, including the manufacturer of the chairs (Pelton &
Crane and Belmont), advised me that these stools were impossible to
fix. I was looking at purchasing a total of 10 new dentist and
assistant chairs!
Fortunately, I
met Stephen LS Technologies. They were able to fix all of my gas
charged lift supports (I later found out this is what adjusted my
chairs) for a VERY reasonable price compared to the cost of replacing
10 chairs.
There service is
excellent! LS Technologies picked up my chairs on Friday after work
and they were returned, as good as new, Monday morning before my day
began. I did not have to “supervise” repairs or wait for them to
finish so that I could lock up the office. This pick up/delivery
service is very practical and definitely timing saving for me.
The follow up
care after the work was complete was extraordinary. One week after the
chairs were returned, Stephen Fenner came to the office and asked if
any of the chairs needed adjusting or “fine-tuning”. One month after,
he called to ensure that the chairs were working properly. This is the
first repair company that has voluntarily followed up on a
repair project in my office.
I would highly
recommend LS Technologies for any of your chair lift services.
Sincerely,
Dr. Eunice M Janzen ATCL, DMD
Back To Top

June 24, 2002
Dear Sir or
Madam:
RE: LS
TECHNOLOGIES
This is to inform
you of our recent experience with Stephen Fenner and LS TECHNOLOGIES.
My partner, Lori
Robinson, was having trouble with her optometric patient exam chair.
Throughout the exam it would gradually lose height which made it very
difficult to perform a refraction.
Stephen Fenner
from LS TECHNOLOGIES examined the chair, and removed it for repair.
Within one week the chair was repaired. Imagine my surprise when
exactly the same problem occurred with my patient chair the next
month. Stephen at LS TECHNOLOGIES was able to repair it as well, and
in addition adjusted my examination chair. Stephen made follow-up
visits to fine-tune and make any adjustments.
We were very
pleased with LS TECHNOLOGIES service and expertise and would recommend
them highly.
Sincerely,
D.L. Barrie, B.Sc., O.D.
InVision Eyecare Centre
DLB/dgy
Back To Top

July 25, 2003
To whom it may
concern,
This letter is to
inform you of the high quality of service that Stephen Fenner of LS
Technologies supplies to our automotive service center.
Hood and hatch
lift supports are a very important part of our customer’s vehicle, but
once they become inoperable, they are commonly replaced with a broom
handle or hockey stick! One phone call to Stephen and our customer can
say goodbye to the broom handle when struggling to check fluid levels
under the hood, unload the dog, or remove the weekly groceries from
the vehicle. Stephen refills the lift supports on site and makes sure
that they are filled to the correct pressure for every application.
He is very
reliable and courteous, and the start/finish time for each repair is
minimal. The refilled supports perform better than new.
I would also like
to mention that Stephen refilled a set of supports on one occasion
that would only have been available from the USA with a minimum 14 day
delivery time, plus shipping and express charges!
If you enjoy
quality service and guaranteed workmanship, call LS Technologies – you
will not regret it!
Michael R.
Leather CEO
Janet E. Leather - Office Manager
Tech 1 Automotive Inc.
Back To Top

July 21, 2003
To Whom It May Concern:
This letter is to
inform you of our satisfaction for the product and customer service we
received from Stephen Fenner, of LS Technologies.
Stephen was able
to ascertain that our factory original lift supports were not at the
proper pressure. He was also able to help us find a pressure setting
to make our photocopier lifts work better. This combination of service
and value means that we no longer have to purchase factory original
lifts. We have Stephen repair about sixteen lift supports per month
and we haven’t had a problem with any of them.
For cost savings
and quality service, you can’t beat Stephen Fenner & LS Technologies.
Sincerely,
Rod Oborowsky
Copier / Fax Service Manager
Central business equipment systems
Back To Top

September 10,
2002
Letter of
Testimonial for Stephen Fenner of LS Technologies
To Whom It May
Concern:
Dr. Robinson and
myself were having some difficulty with some of our examination chairs
in the office. We were told that we would have to replace a chair that
would cost anywhere from $4,000 to 5,000 Canadian. Stephen was a
patient of mine who examined the chair and felt that it could be
repaired. Through his courteous and understanding nature, he took the
chair over a weekend. He picked the chair up after my last patient on
a Friday and had it returned in excellent operating form Monday before
my first patient.
His professional
fees were very reasonable and the quality of work was of high
standard. The chair we had fixed does take a lot of
traffic and significant abuse, and has maintained in good shape for
approximately a year now.
I wish to thank
Stephen and his partner for a job well done.
Best regards,
D. Lukenchuk, O.D.
Back To Top

HAMM CONSTRUCTION LTD
SEWER & WATER CONTRACTORS
603-48th STREET EAST
SASKATOON, SK S7K 6G2
Phone: (306) 931-6626
Fax: (306) 933-3166
July 30, 2003
To whom it may
concern:
This letter is to inform you of our satisfaction for the product and
customer service that we received from Stephen Fenner of LS
Technologies.
Hood, engine
cover, and seat lift supports are important to our business, not only
to aid in the servicing of our heavy industrial equipment, but also
for safety concerns. This product allows our mechanics and equipment
operators to safely work on and maintain equipment without the fear of
hoods or engine covers coming down on their heads.
The factory
pressure settings of the lift supports on our skid steer loaders made
it difficult to lift seat compartments. Stephen was able to correct
this problem by refilling and setting the lift supports to the proper
pressure levels. Now the seat compartments can be lifted with very
little effort.
The service that
we received from LS Technologies has never been available to us. Prior
to this service, we had to replace all lift supports with new ones
which generally had to be ordered in, requiring up to 2 weeks for
delivery and only a 90-day guarantee. Stephen provides next day
service at a lower cost and a 1-year guarantee.
For cost
effective and guaranteed service, you can rely on LS Technologies.
Sincerely,
William Dyck
Hamm Construction Ltd.
Shop Foreman
Back To Top
|